Indexat a

handle Riunet UPV Tesis doctorales Enllaç extern

Documents i arxius

Llicència i ús

Anàlisi d'autories institucional

Martí Calatayud, Manuel CésarDirectorMontañés Sanjuan, María TeresaDirector

Compartir

Estudio electroquímico para la recuperación de antimonio de efluentes del electro-refinado de cobre por electrodeposición

Data de lectura: 2024-04-27 Centre: | ID: 10251/203892

Autor/a: Hernández Pérez, Lorena

Director/a: Montañés Sanjuan, María Teresa ; Martí Calatayud, Manuel César

Resum

[EN] This Doctoral Thesis focuses on the recovery by electrodeposition of Sb present in an effluent from the copper metallurgy. The effluent on which this study is based is generated during the regeneration with concentrated hydrochloric acid of the ion exchange resins used in one of the sub-stages of copper electro-refining. It is an acid electrolyte containing several impurities, among them, Sb and Bi, which are considered critical raw materials by the European Union due to their supply risk and economic relevance. The aim of this Thesis is the recovery of Sb and reuse of HCl. To achieve both objectives, electrodeposition has been studied as a separation operation for the treatment of the effluent. This operation has been investigated through electrochemical techniques, primarily, cyclic and linear sweep voltammetry. First, the study has been conducted with synthetic solutions emulating the effluent generated in the Chilean metallurgy industries. The electrochemical characterization of the Sb solution in the HCl medium has shown that, mass-transfer limits the reduction of Sb(III) to metallic Sb and a high HCl concentration favors the recovery of Sb. From the electrodeposition tests the relevance and negative influence on Sb deposition of the secondary reactions, the hydrogen evolution reaction (HER) and the chlorine generation, has been proven. The HER occurs at the cathode and involves the generation of hydrogen bubbles at high current densities, which decrease the effective surface area of the working electrode and even cause the detachment of the Sb deposits. The chlorine generation at the anode leads to the redissolution of the Sb deposits detached by the HER. After conducting these experiments, it has been concluded that it is possible to increase the Sb recovery rate, if higher concentrations of this element are present in the solution or the hydrodynamic conditions of the electrodeposition process are improved. The influence of the presence of Bi in the synthetic solution on the Sb electrodeposition has also been investigated. The reduction potential of both elements is similar, implying that the individual recovery of Sb by electrodeposition is challenging. However, if the operating conditions do not imply exceeding the limiting current density of the system, a high electrodeposition selectivity towards Sb is achieved. If the concentration of Bi in the solution is higher than that of Sb, the simultaneous electrodeposition of both elements takes place, but, on the contrary, a high value of current efficiency is obtained because the influence of the HER on Bi reduction is not as significant as that on Sb deposition. The application of the previously analyzed techniques has been studied with a real effluent, that was provided by a Spanish company. It has been proven that the conclusions obtained with the synthetic solutions can be applied to a real effluent. It has been confirmed that, as the applied current density increases, the Sb deposition worsens due to the relevance of the other reactions that take place during the process: the reduction of the other elements and the evolution of the medium. The deposits obtained contain some elements present in the real effluent: Sb, Bi, As and Cu, the most significant being the first. From this study, it has been concluded that purifying the HCl by removing the elements contained in the electrolyte via electrodeposition is possible. Finally, the possibility of replacing the HCl used as a regenerant with a deep eutectic solvent has been considered based on their properties, among which are a high solubility of metals and their synthesis from renewable sources. In particular, the research has been carried out with oxaline, which presents a high dissolution capacity for Sb and a wide potential window that would benefit the application of the electrodeposition technique to recover Sb captured during the resins regeneration process. (Summary)

Paraules clau

Indicis de qualitat

Impacte i visibilitat social

Informació