Indexado en

Enlace externo Enlace externo

Licencia y uso

Citaciones

Altmetrics

Análisis de autorías institucional

Martins, LaAutor o CoautorRibelles, JlgAutor o CoautorTort-Ausina, IAutor (correspondencia)

Compartir

Isothermal crystallization of poly(vinylidene fluoride) blended with the ionic liquid [Emim]2[Co(SCN)4]: Simultaneous analysis of crystalline phases by infrared spectroscopy and differential scanning calorimetry

Publicado en:Polymer. 296 126816- - 2024-03-15 296(), DOI: 10.1016/j.polymer.2024.126816

Autores: Martins, Luis A; Ribelles, Jose Luis Gomez; Costa, Carlos M; Correia, Daniela M; Lanceros-Mendez, Senentxu; Krakowsky, Ivan; Tort-Ausina, Isabel

Afiliaciones

Resumen

The combination of poly (vinylidene fluoride) (PVDF) with ionic liquids (ILs) is increasingly being studied for the development of smart materials. Together with the functional response provided by the IL, its incorporation into PVDF allows to nucleate specific electroactive phases of the polymer, depending on the processing conditions. Thus, the isothermal crystallization of PVDF incorporating different contents of the magnetic ionic liquid bis(1ethyl-3-methylimidazolium) tetrathiocyanatocobaltate ([Emim]2 [Co(SCN)4]) is reported in this work. Morphological properties of the films were obtained by field emission scanning electronic microscopy (FESEM), and particularly, for the higher contents of IL, segregation was observed through artifacts present on the film surface. This fact has been further confirmed by energy-dispersive x-ray spectroscopy (EDX). The growth of the crystalline phases of PVDF during isothermal crystallization at different temperatures has been analyzed by Fourier transform infrared (FTIR) spectroscopy. Although alpha, beta and gamma crystalline phases were present in all samples, their relative percentages varied greatly with the amount of IL present, demonstrating that [Emim]2 [Co(SCN)4] is a strong inductor of the electroactive (EA) phases of PVDF. By evaluating both FTIR and DSC data, this effect has been ascribed to the higher melting temperatures of the EA structures whose formation is favored at higher crystallization temperatures. The melting temperature (Tm) of the beta phase is higher than that of the alpha phase, whereas Tm for the gamma phase is higher than for alpha and beta phases. Thus, together with the specific functional properties provided by the IL, such as magnetic response and ionic conductivity, the addition of [Emim]2 [Co(SCN)4] strongly influences PVDF's crystallization kinetics, proving to be a simple and very effective way to nucleate specific phases of PVDF, according also to the specific processing conditions.

Palabras clave